Configuring vxdbd for SFDB tools authentication

Last published : Jun 10, 2026
To configure vxdbd, perform the following steps as the root user
  1. Run the sfae_auth_op command to set up the authentication services.
    \# /opt/VRTS/bin/sfae_auth_op -o setup
    Setting up AT
    Starting SFAE AT broker
    Creating SFAE private domain
    Backing up AT configuration
    Creating principal for vxdbd
    1. Stop the vxdbd daemon.
    \# /opt/VRTS/bin/sfae_config disable
    vxdbd has been disabled and the daemon has been stopped.
  2. Enable authentication by setting the AUTHENTICATION key to yes in the /etc/vx/vxdbed/admin.properties configuration file.
If /etc/vx/vxdbed/admin.properties does not exist, then usecp /opt/VRTSdbed/bin/admin.properties.example /etc/vx/vxdbed/admin.properties.
  1. Start the vxdbd daemon.
\# /opt/VRTS/bin/sfae_config enable
vxdbd has been enabled and the daemon has been started.
It will start automatically on reboot.
The vxdbd daemon is now configured to require authentication.