Guidelines for setting the media speed for LLT interconnects

Last published : Jun 11, 2026
Review the following guidelines for setting the media speed for LLT interconnects:
  • Veritas recommends that you manually set the same media speed setting on each Ethernet card on each node.
If you use different media speed for the private NICs, Veritas recommends that you configure the NICs with lesser speed as low-priority links to enhance LLT performance.
  • If you have hubs or switches for LLT interconnects, then set the hub or switch port to the same setting as used on the cards on each node.
Details for setting the media speeds for specific devices are outside of the scope of this manual. Consult the device's documentation or the operating system manual for more information.
Related information