Configuring the CP server manually for HTTPS-based communication

Last published : Sep 28, 2026
Perform the following steps to manually configure the CP server in HTTPS-based mode.
To manually configure the CP server
  1. Stop VCS on each node in the CP server cluster using the following command:
    \# hastop -local
    1. Edit the main.cf file to add the CPSSG service group on any node. Use the CPSSG service group in the sample main.cf as an example:
    Customize the resources under the CPSSG service group as per your configuration.
    1. Verify the main.cf file using the following command:
    \# hacf -verify /etc/VRTSvcs/conf/config
If successfully verified, copy this main.cf to all other cluster nodes.
  1. Create the /etc/vxcps.conf file using the sample configuration file provided at /etc/vxcps/vxcps.conf.sample.
Arctera recommends enabling security for communication between CP server and the application clusters.
If you configured the CP server in HTTPS mode, do the following:
  • Edit the /etc/vxcps.conf file to set vip_https with the virtual IP addresses required for HTTPS communication.
  • Edit the /etc/vxcps.conf file to set port_https with the ports used for HTTPS communication.
  1. Manually generate keys and certificates for the CP server.
More Information