Veritas Extension for Oracle Disk Manager

Last published : Jun 10, 2026
The Veritas Extension for Oracle Disk Manager (ODM) is specifically designed for Oracle 10gR2 or later to enhance file management and disk I/O throughput. The features of ODM are best suited for databases that reside in a Veritas File System (VxFS). ODM allows Oracle 10gR2 or later users to improve database throughput for I/O intensive workloads with special I/O optimization.
The Veritas extension for ODM is supported in non-global zones. To run Oracle 11g Release 2 on a non-global zone and use ODM, the Oracle software version must be 11.2.0.3.
Care must be taken when installing and removing packages when working with the VRTSodm package, for more information refer to the following:
Enabling ODM file access from non-global zones with VxFS
This section describes how to the enable ODM file access from non-global zones with VxFS:
  • On Solaris 11:
    • If there is no existing zone.
  • If there is existing zone.
On Solaris 11: To enable ODM file access from non-global zones with VxFS, if there is no existing zone
  1. Install SF in the global zone.
See the Storage Foundation Configuration and Upgrade Guide.
  1. Set publisher for installation after going in the pkgs folder of the same installer:
    global# pkg set-publisher -P -g VRTSpkgs.p5p Veritas
    1. Create a zone with the following configuration:
    zonecfg:myzone> create
    create: Using system default template 'SYSdefault'
    zonecfg:myzone> set zonepath=/export/home/myzone
    zonecfg:myzone> set fs-allowed=default,vxfs,odm
    zonecfg:myzone> add fs
    zonecfg:myzone:fs> set dir=/etc/vx/licenses/lic
    zonecfg:myzone:fs> set special=/etc/vx/licenses/lic
    zonecfg:myzone:fs> set type=lofs
    zonecfg:myzone:fs> end
    zonecfg:myzone:fs> remove anet linkname=net0
    zonecfg:myzone> add device
    zonecfg:myzone:device> set match=/dev/vxportal
    zonecfg:myzone:device> end
    zonecfg:myzone> add device
    zonecfg:myzone:device> set match=/dev/fdd
    zonecfg:myzone:device> end
    zonecfg:myzone> add device
    zonecfg:myzone:device> set match=/dev/odm
    zonecfg:myzone:device> end
    zonecfg:myzone> verify
    zonecfg:myzone> commit
  2. Install the zone:
    global# zoneadm -z myzone install
    1. Boot the zone.
    global# zoneadm -z myzone boot
  3. Configure the zone:
    global# zlogin -C myzone
    1. Install VRTSvxfs, VRTSodm, and VRTSvlic in the zone:
    myzone# pkg install --accept VRTSvxfs VRTSodm VRTSvlic
  4. Enable the vxodm service inside the zone:
    myzone# svcadm enable vxodm
    1. Execute the mount -p | grep odm in the local zone and confirm the output looks similar to the following:
    /dev/odm - /dev/odm odm - no nodevices,smartsync,zone=myzone,sharezone=5
  5. Unset the publisher after coming inside the global zone:
    global# pkg unset-publisher Veritas
    On Solaris 11: To enable ODM file access from non-global zones with VxFS, if there is existing zone
    1. Check whether, SF is installed in the global zone or not. If not, Install SF in the global zone.
    See the Storage Foundation Configuration and Upgrade Guide.
    1. 2\. Set publisher for installation after going in the pkgs folder of the same installer with which SF was installed in the global zone.
    global# pkg set-publisher -P -g VRTSpkgs.p5p Veritas
  6. Check whether the zone is in running or in installed state. If it is running then shut it down:
    global# zoneadm -z myzone shutdown
    1. Set fs-allowed to be default,vxfs,odm:
    zonecfg -z myzone
    zonecfg:myzone> set fs-allowed=default,vxfs,odm
    zonecfg:myzone> verify
    zonecfg:myzone> commit
  7. Add license directory as fs in zone configuration file:
    zonecfg -z myzone
    zonecfg:myzone> add fs
    zonecfg:myzone:fs> set dir=/etc/vx/licenses/lic
    zonecfg:myzone:fs> set special=/etc/vx/licenses/lic
    zonecfg:myzone:fs> set type=lofs
    zonecfg:myzone:fs> end
    zonecfg:myzone> verify
    zonecfg:myzone> commit
    1. Add three devices vxportal, fdd, and odm in the zone configuration file:
    zonecfg -z myzone
    zonecfg:myzone> add device
    zonecfg:myzone:device> set match=/dev/vxportal
    zonecfg:myzone:device> end
    zonecfg:myzone> add device
    zonecfg:myzone:device> set match=/dev/fdd
    zonecfg:myzone:device> end
    zonecfg:myzone> add device
    zonecfg:myzone:device> set match=/dev/odm
    zonecfg:myzone:device> end
    zonecfg:myzone> verify
    zonecfg:myzone> commit
  8. Boot the zone:
    global# zoneadm -z myzone boot
    1. Install VRTSvxfs, VRTSodm, and VRTSvlic in the zone:
    myzone# pkg install --accept VRTSvxfs VRTSodm VRTSvlic
  9. Enable the vxodm service inside the zone:
    myzone# svcadm enable vxodm
    1. Execute the mount - p | grep odm in the local zone and confirm the output looking similar to the following:
    /dev/odm - /dev/odm odm - no nodevices,smartsync,zone=myzone,sharezone=5
  10. 11\. Unset the publisher after coming inside the global zone:
global# pkg unset-publisher Veritas