Provisioning boot disks for a guest domain

Last published : Jun 10, 2026
This section describes how to provision boot disks for a guest domain.
A VxVM volume appears as a full disk by default and can be used as a boot disk for a guest domain.
The following process gives the outline of how a VxVM volume can be used as a boot disk.
The example control domain is named primary and the guest domain is named ldom1. The prompts in each step show in which domain to run the command.
To provision boot disks for guest domains
  1. On the control domain, create a VxVM volume of required size for hosting the guest boot image. In this example, a 7GB volume is created:
    primary# vxassist -g boot_dg make bootdisk1-vol 7g
    Veritas recommends that you have a mirrored volume to store the boot image:
    primary# vxassist -g boot_dg make bootdisk1-vol 7g \
    layout=mirror
See the vxassist(1M) manual page for more options.
  1. Configure a service by exporting the /dev/vx/dsk/boot_dg/bootdisk1-vol volume as a virtual disk:
    primary# ldm add-vdiskserverdevice \
    /dev/vx/dsk/boot_dg/bootdisk1-vol bootdisk1-vol@primary-vds0
    1. Add the exported disk to ldom1:
    primary# ldm add-vdisk vdisk1 bootdisk1-vol@primary-vds0 ldom1
  2. Follow Oracle's recommended steps to install and boot a guest domain, and use the virtual disk vdisk1 as the boot disk during the network, CD, or ISO image install.
    Note: It is not supported to encapsulate such a boot disk inside the guest using VxVM or any other 3rd party Volume Management software. Full SCSI disks can be encapsulated, while vdisks that come from volumes cannot.