Configure the AlternateIO resource
The AlternateIO resource monitors storage and network services that are exported to a guest Logical Domain. The AlternateIO resource is not dependent on storage or network resources. However, its state depends upon the state of storage or network service groups.
| Configuration parameter | Description |
|---|---|
| StorageSG attribute | This attribute is a key value pair. A storage service group is the key and the value of the key can either be 0 or 1. |
| Set the value of the key to 1 to bring the service group online when the AlternateIo resource comes online and to take the service group offline when the AlternateIo resource goes offline. | |
| Localize the StorageSG attribute of the AlternateIO resource with the list of storage service groups that are configured on each node. | |
| lang=txt | |
| AlternateIO altiores1 | |
| ( | |
| StorageSG @primary1 = { primary1-strsg1 = 1 } | |
| StorageSG @primary2 = { primary2-strsg1 = 1 } | |
| ) | |
| NetworkSG attribute | This attribute is a key value pair. A network service group is the key and the value of the key can either be 0 or 1. |
| Set the value of the key to 1 to bring the service group online when the AlternateIo resource comes online and to take the service group offline when the AlternateIo resource goes offline. | |
| Localize the NetworkSG attribute of the AlternateIO resource with the list of network service groups that are configured on each node. | |
| lang=txt | |
| AlternateIO altiores1 | |
| ( | |
| NetworkSG @primary1 = { primary1-nwsg = 0 } | |
| NetworkSG @primary2 = { primary2-nwsg = 0 } | |
| ) | |
| Preonline trigger | For any of the service groups configured in the StorageSG or NetworkSG attributes, if you set the value to 1, configure the preonline trigger at the service group level. |
| Configuring the preonline trigger ensures that service groups listed in the StorageSG attributes are offline on all systems except onto the system where failover or a manual switch over is initiated. | |
| For information on enabling the preonline trigger, see Configure service group to monitor services from multiple I/O domains. |