The vxloadm utility enables access to a file system contained in a VxVM volume from the Control Domain

Last published : Jun 10, 2026
The vxloadm utility lets you access a file system contained inside a VxVM volume from outside the guest domain, that is from the Control Domain. This is done by mapping all the partitions contained within that volume using the vxlo driver. The partitions can then be mounted if they contain valid file systems.
To use this vxloadm utility
  1. Check if the driver is loaded in memory:
    \# modinfo| grep vxlo
    226 7b3ec000   3870 306   1  vxlo (Veritas Loopback Driver 0.1)
    1. Run the vxloadm utility:
    \# /etc/vx/bin/vxloadm
  2. You can now use the utility.
  1. Arctera recommends once you are done using the vxloadm utility to unload the vxlo driver:
\# rem_drv vxlo
\# modinfo| grep vxlo
226 7b3ec000   3870 306   1  vxlo (Veritas Loopback Driver 0.1)
\# modunload -i 226
where 226 is the module ID from the modinfo | grep vxlo command.