Upgrading the AIX operating system

Last published : Jun 10, 2026
Use this procedure to upgrade the AIX operating system if OS upgrade is needed. You must upgrade to a version that Veritas InfoScale Enterprise 7.4.2 supports.
To upgrade the AIX operating system
  1. Create the install-db file.
    \# touch /etc/vx/reconfig.d/state.d/install-db
    Note: The AIX OS upgrade may involve single or multiple reboots. It is necessary to create this file to prevent Veritas Volume Manager from starting VxVM daemons or processes.
    1. Set the LLT_START attribute to 0 in the /etc/default/llt file to prevent LLT from starting automatically after restart:
    LLT_START=0
  2. Stop activity to all file systems and raw volumes, for example by unmounting any file systems that have been created on volumes.
    \# umount mnt_point
    1. Stop all the volumes by entering the following command for each disk group:
    \# vxvol -g diskgroup stopall
  3. If you want to upgrade a high availability (HA) product, take all service groups offline.
List all service groups:
\# /opt/VRTSvcs/bin/hagrp -list
For each service group listed, take it offline:
\# /opt/VRTSvcs/bin/hagrp -offline service_group \
    -sys system_name
  1. Upgrade the AIX operating system. See the operating system documentation for more information.
  2. Apply the necessary APARs.
For information about APARs required for Veritas InfoScale Storage 7.4.2, refer to the Veritas InfoScale 7.4.2 Release Notes.
  1. Restart the system.
    \# shutdown -Fr
    1. Enable SFHA to start after you restart.
    \# rm /etc/vx/reconfig.d/state.d/install-db
  2. Change /etc/default/llt to start LLT on the nodes by setting the LLT_START attribute to 1: LLT_START=1.
LLT_START=1