Overview of tasks to configure VCS using the product installer
Table: Tasks to configure VCS using the script-based installer lists the tasks that are involved in configuring VCS using the script-based installer.
Related information
Table: Tasks to configure VCS using the script-based installer
| Task | Reference |
|---|---|
| Start the software configuration | See Starting the software configuration . |
| Specify the systems where you want to configure VCS | See Specifying systems for configuration . |
| Configure the basic cluster | See Configuring the cluster name . |
| See Configuring private heartbeat links . | |
| Configure virtual IP address of the cluster (optional) | See Configuring the virtual IP of the cluster . |
| Configure the cluster in secure mode (optional) | See Configuring VCS in secure mode . |
| Add VCS users (required if you did not configure the cluster in secure mode) | See Adding VCS users . |
| Configure SMTP email notification (optional) | See Configuring SMTP email notification . |
| Configure SNMP email notification (optional) | See Configuring SNMP trap notification . |
| Configure global clusters (optional) | See Configuring global clusters . |
| Complete the software configuration | See Completing the VCS configuration . |