Broadcast address in the /etc/llttab file

Last published : Jun 11, 2026
The broadcast address is set explicitly for each link in the following example.
  • Display the content of the /etc/llttab file on the first node sys1:
    sys1 # cat /etc/llttabset-node sys1
    set-cluster 1
    link link1 /dev/xti/udp - udp 50000  -  192.168.9.1 192.168.9.255
    link link2 /dev/xti/udp - udp 50001  -  192.168.10.1 192.168.10.255
Verify the subnet mask using the ifconfig command to ensure that the two links are on separate subnets.
  • Display the content of the /etc/llttab file on the second node sys2:
    sys2 # cat /etc/llttabset-node sys2
    set-cluster 1
    link link1 /dev/xti/udp - udp 50000  -  192.168.9.2 192.168.9.255
    link link2 /dev/xti/udp - udp 50001  -  192.168.10.2 192.168.10.255
Verify the subnet mask using the ifconfig command to ensure that the two links are on separate subnets.