Unloading LLT and GAB and removing Veritas InfoScale Availability or Enterprise on the departing node

Last published : Sep 18, 2026
Perform the tasks on the node that is departing the cluster.
You can use script-based installer to uninstall Veritas InfoScale Availability or Enterprise on the departing node or perform the following manual steps.
If you have configured Storage Foundation and High Availability as part of the InfoScale products, you may have to delete other dependent packages before you can delete all of the following ones.
To unconfigure and unload LLT and GAB and remove InfoScale Availability or Enterprise
  1. If you had configured I/O fencing in enabled mode, then stop I/O fencing.
    \# svcadm disable -s vxfen
    1. Unconfigure GAB and LLT:
    \# /sbin/gabconfig -U
    \# /sbin/lltconfig -U
  2. Unload the GAB and LLT modules from the kernel.
    • Determine the kernel module IDs:
      \# modinfo | grep gab
      \# modinfo | grep llt
      The module IDs are in the left-hand column of the output.
      • Unload the module from the kernel:
      \# modunload -i gab_id
      \# modunload -i llt_id
  3. Disable the startup files to prevent LLT, GAB, or InfoScale Availability or Enterprise from starting up:
    \# /usr/sbin/svcadm disable -s vcs
    \# /usr/sbin/svcadm disable -s gab
    \# /usr/sbin/svcadm disable -s llt
    1. To determine the packages to remove, enter:
    \# pkginfo | grep VRTS
  4. To permanently remove the InfoScale Availability or Enterprise packages from the system, use the pkg uninstall command. Start by removing the following packages, which may have been optionally installed, in the order shown below.
On Solaris 11:
\# pkg uninstall VRTSvcsea
\# pkg uninstall  VRTSvcswiz
\# pkg uninstall VRTSvbs
\# pkg uninstall VRTSsfmh
\# pkg uninstall VRTSvcsag
\# pkg uninstall VRTScps
\# pkg uninstall VRTSvcs
\# pkg uninstall VRTSamf
\# pkg uninstall VRTSvxfen
\# pkg uninstall VRTSgab
\# pkg uninstall VRTSllt
\# pkg uninstall VRTSspt
\# pkg uninstall VRTSsfcpi
\# pkg uninstall VRTSperl
\# pkg uninstall VRTSvlic
  1. Remove the LLT and GAB configuration files.
\# rm /etc/llttab
\# rm /etc/gabtab
\# rm /etc/llthosts
  1. Remove the language packages and patches.