Mounting VxFS directly into a non-global zone from global zone

Last published : Jun 10, 2026
To direct mount a VxFS file system in a non-global zone, the directory to mount must be in the non-global zone and the mount must take place from the global zone. The following procedure mounts the directory dirmnt in the non-global zone newzone with a mount path of /zonedir/newzone/root/dirmnt.
Note: VxFS entries in the global zone/etc/vfstabfile for non-global zone direct mounts are not supported, as the non-global zone may not yet be booted at the time of/etc/vfstabexecution. Once a file system has been delegated to a non-global zone through a direct mount, the mount point will be visible in the global zone through themountcommand, but not through thedfcommand.
To direct mount a VxFS file system in a non-global zone
  1. Log in to the zone and make the mount point:
    global# zlogin newzone
    newzone# mkdir dirmnt
    newzone# exit
    1. Mount the file system from the global zone:
      • Non-cluster file system:
    global# mount -F vxfs /dev/vx/dsk/dg/vol1 /zonedir/zone1\
    /root/dirmnt
  • Cluster file system:
    global# mount -F vxfs -o cluster /dev/vx/dsk/dg/vol1 \
    /zonedir/zone1/root/dirmnt
    1. Log in to the non-global zone and ensure that the file system is mounted:
    global# zlogin newzone
    newzone# df | grep dirmnt
    /dirmnt (/dirmnt):142911566 blocks 17863944 files